What does Broomfield, Colorado have in common with the Atlantic coast?

Certainly not the winters. No, winter appears quite distinct in both states.
What’s common are the high winds. While Broomfield, Colorado has never needed to endure a hurricane, both states do have to cope with with damaging winds. Finding the best roofing material for a Broomfield, Colorado residence means acknowledging the danger of high winds, even the ones that reach hurricane force. 

The Dangers of Wind in Broomfield

A simplistic perspective of wind on a roof says a gust of wind just picks up fiberglass-asphalt composite shingles and rips them away. This really is called uplift, which is an issue. It is not the sole problem with winds, however. Pressure differences, which can turn a roof into a wing are also caused by wind. Here the pressure on top of your roof suddenly drops compared to the pressure in your loft, and also the house itself shoves the roof up. 

Wind shear is another problem, where a roof can be attacked by a sudden gust of wind at a right angle to the prevailing wind direction with unexpected force. Wind may also take airborne branches and debris that behave like missiles. 

No matter the material that finally surfaces your roof, you need all the fasteners atop, and to take into account all the layers below , that surface. You could use metal, composite shingles, or even ceramic or concrete tiles, as long as the prevailing winds are not not weaker compared to mechanical fasteners. 

The very best roofing material for high winds come from every angle and will be one that works perfectly with a roofing system that is complete, since the hidden forces begin inside your loft. 

What Lies Beneath The Best Roofing Material

If that’s not protected, the rest of your roof is not safe. Topping the sheathing is underlayment and water /ice shield. Underlayment is normally stapled on. Most water/ice shield is self-adhesive. 

Atop the underlayment your finished roof materials will be seen by you. The best roofing material is neither waterproof nor wind-resistant in the event the layers below are not watertight and securely attached. 

The Federal Emergency Management Administration (FEMA) offers specific recommendations for composite shingle facility for high-wind regions. Details include: 

  • Nailing number and patterns of nails per shingle
  • Nail length (including the idea not to make use of staples)
  • Using 30-year shingles rather than 20-year shingles

ASTM

The American Society for Testing and Materials (ASTM) tests and evaluations for enduring high winds, D3161, provides you with some comparison yardstick for choosing fiberglass-asphalt shingles (composite shingles). Search for Class F ratings, so you know the composite shingles withstand 110 mph winds for just two hours. 

Class D, a lower evaluation, carries just the reassurance the shingle resisted 90 mph winds for up to two hours. 

Composite Shingles for roofing in Broomfield

Alloy

Metal roofing is extremely wind resistant if correctly installed. Though initially far more expensive than composite shingles, alloy could be the best roofing material for your scenario if: 

  • You plan to maintain your home over 20 years
  • You’re constructing new
  • You have some anxiety about fire along with winds

With metal roofing, such as perpendicular seam panels, the mechanical fastening is of extreme importance in holding powerful even against 160-mph winds. Uplift issues may be addressed by noticing the merchandise’s evaluation results for UL test and ASTM standard E1592 580. & Nbsp;These evaluations ensure your Broomfield, Colorado house’s metal roof will not blow off from a hurricane-degree pressure difference where high wind rate lowers the pressure and your house ’s higher pressure pushes up on your own roof. Conversely, powerful gusts that wield tremendous loads down on the metal is not going to appreciably impact metal roofing of a gauge sufficient to pass UL 580 or ASTM E1592. 

Ceramic in Broomfield

Ceramic and concrete tile, installed properly and with the mechanical fastenings that are right to pass building code, can also withstand high winds. They cannot readily withstand the airborne debris, including tree branches or alternative building parts which can be thrown up by sudden wind gusts. Ceramic and concrete tiles shatter from blunt force impact, while composite shingles and metal dents may dent, crack, or dislodge, so other choices could be the best roofing material. 

//]]>