What exactly does Federal Heights, Colorado have to deal with like hurricane prone states?

Surely not the winters. No, winter seems really distinct in the two states.
What’s common are the high winds. While Federal Heights, Colorado has never needed to suffer a hurricane, both states do have to cope with with damaging winds. Determing the best roofing material for a Federal Heights, Colorado home means recognizing the danger of high winds, even the ones that reach hurricane strength. 

How Federal Heights Wind Affects a Roof

A simplistic view of wind on a roof says a gust of wind just picks up fiberglass-asphalt shingles that are composite and rips them away. This is named uplift, which is an issue. It is not the sole issue with winds, however. Pressure differences, which can turn a roof into a wing are additionally caused by wind. Here the pressure on top of your roof abruptly drops compared to the pressure in your loft, and also the house pushes against the roof up. 

Wind shear is another dilemma, where a roof can be attacked by a sudden gust of wind at a right angle to the prevailing wind direction with surprising force. Wind may also take airborne branches and debris that behave like missiles. 

No matter the stuff that finally surfaces your roof, you have to consider each of the layers below, and all the attachments atop , that surface. You could use metal, composite shingles, or even concrete or ceramic tiles, as long as mechanical fasteners are stronger compared to the prevailing winds. 

The best roofing material for high winds will be one that works flawlessly with a roofing system that is complete, since the hidden forces begin inside your attic and come from every angle. 

What Lies Beneath The Best Roofing Material

The rest of your roof is not protected if that’s not protected. Topping the sheathing is underlayment and water /ice shield. The underlayment covers the whole roof; ice shield is a thicker, heavier fabric rolled out along the bottom several feet of your roof and along valleys and ridges. Underlayment is normally stapled on. Most water/ice shield is self-adhesive. 

Atop the underlayment you are going to see your finished roof materials. The most effective roofing material is neither waterproof nor wind-immune if the layers beneath are not watertight and securely attached. 

The Federal Emergency Management Administration (FEMA) offers specific recommendations for composite shingle installation for high-wind areas. Details comprise: 

  • Nailing patterns and number of nails per shingle
  • Nail length (including the suggestion not to use staples)
  • Using 30-year shingles rather than 20-year shingles


The American Society for Testing and Materials (ASTM) tests and evaluations for enduring high winds, D3161, provides you with a few comparison yardstick for choosing fiberglass-asphalt shingles (composite shingles). Search for Class F ratings, which means you understand the composite shingles withstand 110 mph winds for just two hours. 

Class D, a lower evaluation, carries just the reassurance that the shingle withstood 90 mph winds for up to two hours. 

Composite Shingles for roofing in Federal Heights


Metal roofing is extremely wind resistant if properly installed. However initially much higher priced than composite shingles, alloy might be the best roofing material for your scenario if: 

  • You plan to keep your house over 20 years
  • You are building new
  • You’ve some worry about fire in addition to winds

Like perpendicular seam panels, with metal roofing, the mechanical fastening is very important in holding strong even against 160-mph winds. Uplift issues could be dealt with by noticing the product’s evaluation results for ASTM standard E1592 and UL test 580. & Nbsp;These evaluations ensure your Federal Heights, Colorado home’s metal roof WOn’t blow off from a hurricane-degree pressure difference where high wind rate lowers the pressure as well as your house ’s higher pressure pushes up on your own roof. Conversely, powerful gusts that use enormous loads down on the metal is not going to significantly affect metal roofing of a gauge sufficient to pass UL 580 or ASTM E1592. 

Tile in Federal Heights

Ceramic and concrete tile, installed correctly and with the correct mechanical fastenings to pass building code, may also resist high winds. They cannot readily defy the airborne debris, like tree branches or other building components that can be thrown up by sudden wind gusts. Ceramic and concrete tiles shatter from blunt force impact, while composite shingles and metal scores may dent, crack, or dislodge, so other alternatives could be the best roofing material.